120 VOLT Fuel Filter Heater Wrap

Below is information on how THIS product fits OUR fuel system. Then below that, it is information directly from WVO themselves.

- Use two of these wraps for ONE Marty's fuel system. Place one wrap on each filter.

- When fuel gels it will be captured in the filter, this is where you need heat the most.

- Fuel will NOT gel up any differently in OUR fuel system than it would in a standard fuel system. In fact, these heater wraps are NOT required if the fuel has the proper winter additives in it. Also, our fuel system makes it EASIER to deal with fuel gelling than the OEM system, if it does happen.

- Wind Chill does NOT affect actual temperature of the fuel or filters - it only affects the rate at which the temperature changes to ambient. See the video below.

- You can install a male 120v plug end directly on the end of the wires or extend the wires and then install a male 120v plug end on each of these filter wraps. Usually we route these to the front of the truck and install a 3 way plug adapter so we can couple them with the block heater. A 16 or 14 gauge (15a) outlet is more than adequate for these filter wraps, but when coupled with the block heater it is recommended that you do not use anything LESS than 12 gauge and you really should be using a 20a outlet.

- This is a great option for trucks that have access to electrical outlets anytime they are leaving their trucks parked for extended periods of time. Understand power outages, tripped GFCI/Breakers and unplugged cords can all stop your heaters from working. 12V options are available on our website as well.

- This is also a great option for trucks that carry generators - think welding rigs, campers and boats. 

Reminder the below information is DIRECTLY from the company that makes this product. The information is generic and NOT specific to our fuel system. 

Heated Filter Wrap 12V - 100W

• INCLUSION — The kit comes with heated filter wrap 120V - 100W . This is a wrap meant to warm canister fuel filters for proper flow of WVO. This is a smaller wrap for a wide range of filters. It has 14 gauge wires and draws less than 1 amp at 120v.
• COMPATIBILITY — It works with our Donaldson Filter combo and with Mercedes, VW and other stock fuel filters. Surface temperature can reach 300F+ Only use on metal filters.
• ADAPTABLE SIZE — This fuel filter fits on stock fuel filters on Mercedes, VW and more. It fits filters with Diameter between 3"-4"(7.6 - 10.1cm); Circumference between 9.5"-12.5"(24-31.5cm) - Heating area is 3"(7.6cm) high by 9.5"(24cm) long.
• BUILT TO LAST — This fuel filter heater wrap is made of heavy duty heating material in the US by Arlon Silicone Technologies Division.