1994.5 - 2003 7.3L CNC Fab Super Street 250cc Hybrid Injectors

These CNC Fabrication, LLC remanufactured Super Street (250/100 or 250/200) hybrid injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke.

Commonly called a Stage 3, these "Super Street" 250cc hybrid injectors will typically produce around 550-600hp with proper supporting modifications depending on the year of your truck.  100% nozzles will give better towing capabilities and run cleaner, 200% nozzles will give the most power but expect EGT's to be higher.  This size of injector is where you will want to seriously think about bottom end engine work done, like billet rods and a plate girdle. Not recommended for heavy towing.

**See Suggested Modifications tab for turbo, fuel, and hpop upgrades**

Features:

• Great for daily driving to weekend warrior fun
• 100%, or 200% over nozzles
• Tungsten Coated Plungers and Barrels
• O-rings
• Nozzle and Intensifiers Springs
• Better than OE specifications
• We do NOT use shims, these injectors are machined to set proper armature clearance
• Each set of injectors will come with flow sheet test results
• Tested on the newest Hartridge flow bench using the latest injector technology
• Free Ground Return Shipping

Shipping: Lead times may vary depending on workload

**PLEASE ALLOW 3-5 DAYS AFTER YOUR CORE(S) HAS BEEN RECEIVED FOR OUR ACCOUNTING TEAM TO PROCESS YOUR REFUND. EXPECT DELAYS IF YOU DO NOT FILL OUT THE PAPERWORK PROPERLY**

**See Core Policy >>> Here <<<**

If you are sending in your cores first, please click the "SENDING IN FIRST" link below and print off the form to send it in with your injectors. If you have extra cores, please see the other form for store credit or reimbursement options.

1. CORE RETURN
2. INJECTOR REGISTRATION

Warranty:

Covered by CNC Fabrication's limited lifetime warranty.  Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed.  Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc.  Warranties are non-transferable, and only offered to the original purchaser.

Suggested Modifications

94.5-97 Trucks:  Upgrading your turbo, fuel system, hpop, and adding an intercooler is a must. These will require custom tuning. Stage 2 hpop will work with these injectors. Stock fuel and hpop (15*) system will not support these.

Recommended Turbo Options:

• KC Turbo KC300X Stage 3 66/73 94-97 7.3L Turbo - 300230
• Borg Warner s369sxe
• BORG WARNER S467.7FMW T4 TURBO - 178855
• BORG WARNER S472FMW T4 TURBO - 14879880082
• CSF Racing 99-03 7.3L Replacement Intercooler - 6017
• Aftermarket T-4 turbo mount kit

Recommended Fuel Upgrade: 

• CNC Fabrication 94.5-E99 7.3L 4-Line Feed Fuel Line Kit - 422011
• AEM 400LPH Fuel pump (AN) - 50-1005
• AIRDOG II-5G '99-03 7.3L Air/Fuel Separation System - A7SABF592
• 94.5-03 7.3L Fuel System Bundle - 7.3-BUND-FUEL

Recommended Hpop Upgrade: 

• CNC Fabrication 94.5-95 7.3L Stage 2 HPOP - 424016
• CNC Fabrication 96-03 7.3L Stage 2 HPOP - 424018

98.5-03 Trucks:  Upgrading your turbo, fuel system, hpop, and adding an intercooler is a must. Custom tuning is required. Note the links for Early '99 trucks.

Recommended Turbo Options:

• KC Turbo KC300X Stage 3 66/73 (1.0 A/R) Late 99-03 7.3L Turbo - 300232
• KC Turbo KC300X Stage 3 66/73 Early 99 7.3L Turbo - 300231
• Borg Warner s369sxe
• BORG WARNER S467.7FMW T4 TURBO - 178855
• BORG WARNER S472FMW T4 TURBO - 14879880082
• CSF Racing 99-03 7.3L Replacement Intercooler - 6017
• Aftermarket T-4 turbo mount kit

Recommended Fuel Upgrade: 

• CNC Fabrication 99-03 7.3L 4-Line Feed Fuel Line Kit - 422001
• CNC Fabrication Late 99-03 7.3L 4-Line Feed Fuel Line Kit - 422017
• AEM 400LPH Fuel pump (AN) - 50-1005
• AIRDOG II-5G '99-03 7.3L Air/Fuel Separation System - A7SABF592
• 94.5-03 7.3L Fuel System Bundle - 7.3-BUND-FUEL

Recommended Hpop Upgrade: 

• CNC Fabrication 96-03 7.3L Stage 2 HPOP - 7.3-HPOP-SGT2-96-03